CABLE ACCESS GROMMET	CIRCULAR FLOOR BOX FOR EITHER 13 AMP SOCKET OR RJ45 SOCKET	CIRCULAR FLOOR SHOWING 13 AMP SOCKET FITTED	CONDUIT ACCESS GROMMET
Three sizes are offered consisting of an outer flange, which push fits into a circular aperture and a top cover assembly which is snapped into the flange after the cable end (with connector) has been passed through. The top cover assembly rotates to uncover access holes which are passed over the cable before the assembly is fitted. The 125mm type accommodates three cable holes and 100mm type two cable holes are intended for floors, walls and consoles. The 80mm type is intended for desks and work surfaces and has a ratchet, which keeps the top cover located in several positions. This allows a variety of cable sizes to pass through the three access holes promoting a clean and tidy visual appearance. All types are available in black or grey as standard although other options will be considered.	These circular floor boxes consist of an outer flange, which push fits into a circular aperture and top cover assembly, which is snapped into the flange. The top cover assembly has a cover which rotates to uncover up to three access holes. This allows a variety of cable sizes to pass through the access holes promoting a clean and tidy visual appearance. The 1.5mm thick anodized aluminium plate is fixed in place by 2 x 4mm screws into the floor box assembly and depending on type selection can accommodate either rj45, BT or 13amp sockets (not included). There are four knockouts (2 x 20mm and 2 x 25mm) for under floor cable entry, two on the bottom and two on the side. The floor boxes are available in black or grey as standard but specials can be accommodated.		These grommets consist of an outer flange, which push fits into a circular aperture, and a top cover assembly which is snapped into the flange after the conduit or cable end ( with connector) has been passed through. The top assembly has a cover, which rotates to uncover an access slot. These grommets will allow access of up to three 28mm conduits, are intended for floors, but equally applicable to walls and consoles. This allows a variety of conduits or cable sizes to pass through the access slot promoting a clean and tidy visual appearance. They are available in black or grey as standard but can be made in any colour by special request.
TECHNICAL SPECIFICATION; 125MM 100MM 80MM   Overall diameter of bezel; 140mm 110mm 91mm Fixing hole size; 127mm 95mm 79mm Flange depth below surface; 37mm 28mm 16mm Bezel thickness above surface; 3mm 3mm 3mm Inside diameter of flange; 120mm 89mm 73mm Max cable diameter; 8mm 12mm 9mm Material; BS ABS ABS   PART NUMBERS; BLACK CR125CBB CR100CBB CR80CBB GREY CR125CBG CR100CBG CR80CBG PRICES; £4.20 £3.57	TECHNICAL SPECIFICATION;   Overall diameter of bezel; 140mm Fixing hole size; 127mm Flange depth below surface; 80mm Bezel thickness above surface; 3mm Inside diameter of flange; 111mm Depth of connector box; 43mm Max cable diameter; 18mm Diameter of aluminium plate; 110mm Material of box; ABS   STANDARD PLATE OPTIONS; DISCRIPTION PART NUMBER PART NUMBER 4 X SHUTTERED RJ45/BT SOCKET CR125FBGRP (GREY) CR125FBBRP(BLACK) 1 X 13AMP SOCKET CR125FBGSP (GREY) CR125FBBSP( BLACK) PRICES; £23.95 £23.95	NOTE PRICE DISCOUNTS FOR BATCH QUANTITIES	Technical specification; 125mm Overall diameter of bezel; 140mm Fixing hole size; 127mm Flange depth below surface; 37mm Bezel thickness above surface; 3mm Inside diameter of flange 120mm Max cable diameter; 28mm x3 Material; ABS   Part numbers; CR125CDG(grey) CR125CDB(black)   PRICES; £4.20